White wallpaper with white and black chevron pattern
Reference: P14383Transform your space with our stunning White wallpaper with white and black chevron pattern. This design elegantly combines a sleek white backdrop with striking black chevron stripes, creating a contemporary look that is both chic and inviting. The matte finish adds a touch of sophistication, making it perfect for any room in your home. Crafted from non-woven material, this wallpaper is not only visually appealing but also durable and easy to maintain. With a longevity of 10-15 years, it promises to enhance your interiors for years to come!
Why this product should be used for decoration
The White wallpaper with white and black chevron pattern white wallpaper is an excellent choice for those looking to refresh their décor. Its modern design adds a dynamic flair to any space, making it ideal for both residential and commercial environments. Imagine the energy this wallpaper brings to your living room or office, inspiring creativity and warmth! Elevate your surroundings with this captivating choice that highlights style and sophistication in every detail.
How to apply this product
Applying the White wallpaper with white and black chevron pattern white wallpaper is a simple DIY project! Use glue to adhere it to your walls, and with basic tools like a roller, brush, and cutter, you can easily achieve a professional finish. Just ensure your surface is clean and smooth for the best results.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.