Poppies Pattern flower wallpaper
Reference: P8862Elegant floral pattern featuring a scattering of poppies in warm orange tones, providing a fresh, natural aesthetic.
The Poppies Pattern flower wallpaper features a stunning design with a watercolor floral pattern, showcasing beautiful orange flowers. The non-woven wallpaper is manufactured in matt colors, offering a durable and long-lasting decoration solution for any space. With a grammage of 180 grams per square meter, this wallpaper is easy to apply using glue on the wall or on the product, requiring simple tools such as a roller, brush, and cutter. Additionally, it can be easily cleaned with a damp cloth and neutral soap. This high-quality wallpaper has a durability of 10-15 years and holds an M2 reaction to fire certification, ensuring safety and peace of mind. When it's time for a change, the wallpaper can be effortlessly removed by wetting the product with a sprayer. Each roll is 50 centimeters wide, making it convenient to install and providing a seamless finish.
Why this product should be used for decoration
The Poppies Pattern flower wallpaper is the perfect choice for adding a touch of elegance and charm to any room. The captivating floral pattern and vibrant orange flowers create an inviting and refreshing atmosphere, making it an ideal option for brightening up any space with a cheerful and stylish aesthetic.
How to apply this product
Applying the Poppies Pattern flower wallpaper is a simple and straightforward process. Start by preparing the wall and cutting the wallpaper to the desired length. Apply glue to the wall or the back of the wallpaper, then carefully position and smooth it out using a roller. Trim any excess with a cutter for a perfect fit. With these easy steps, you can effortlessly transform your space with this stunning wallpaper.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.