Lemon pattern yellow wallpaper
Reference: P6170The Lemon pattern yellow wallpaper features a stunning design with vibrant yellow hues and a delightful lemon pattern, making it the perfect choice for adding a touch of freshness and energy to any space. The citrus fruit-inspired design brings a sense of brightness and positivity, creating an uplifting atmosphere in any room.
why this product should be used for decoration
The Lemon pattern yellow wallpaper is a must-have for anyone looking to infuse their space with a burst of color and personality. Its cheerful design and vibrant yellow tones make it a standout choice for adding a lively and refreshing touch to any room, whether it's a kitchen, living room, or bedroom. With this wallpaper, you can effortlessly bring a sense of warmth and joy to your home decor!
how to apply this product
Applying the Lemon pattern yellow wallpaper is a simple and straightforward process. Start by preparing the wall surface and cutting the wallpaper to the desired length. Then, apply adhesive to the wall or the back of the wallpaper, using a roller or brush. Next, carefully position the wallpaper on the wall, smoothing out any air bubbles with a paintbrush. Finally, use a cutter to trim any excess paper for a perfect fit. The result is a stunning citrus-inspired backdrop that will instantly brighten up your space!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.