Leafy Botanical Pattern leaf wallpaper
Reference: P8694Elevate any space with this serene leafy botanical pattern, featuring a harmonious blend of tropical leaves in soothing yellow and grey tones, conveying an organic and fresh ambience.
The Leafy Botanical Pattern leaf wallpaper features a stunning design with vibrant tropical leaves in shades of yellow and grey, creating a visually captivating botanical pattern. This non-woven wallpaper is manufactured in matt colours, ensuring a sleek and elegant finish for any space. With a durability of 10-15 years, this wallpaper is a long-lasting solution for adding a touch of nature to your home decor.
Why this product should be used for decoration
The Leafy Botanical Pattern leaf wallpaper is the perfect choice for decoration, as it brings the beauty of the outdoors inside, creating a refreshing and vibrant atmosphere. The botanical design and leaf pattern add a natural and calming element to any room, making it an ideal option for creating a peaceful and inviting space.
How to apply this product
Applying the Leafy Botanical Pattern leaf wallpaper is a simple process that can be easily accomplished with the use of glue, a roller, a brush, and a cutter. Once applied, it can be cleaned with a damp cloth and a little neutral soap, ensuring easy maintenance. Additionally, it can be easily removed by wetting the product with a sprayer, providing flexibility in design changes.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.