Floral tiles design entryway wallpaper
Reference: P7830The floral tiles design entryway wallpaper is a stunning addition to any space, featuring a beautiful and intricate pattern that adds a touch of elegance and sophistication. The matt colours give it a muted and subtle look, perfect for creating a calming atmosphere in any room. Made from non-woven wallpaper material, this product is durable and long-lasting, with a lifespan of 10-15 years. Applying this wallpaper is a breeze, requiring only glue, a roller, brush, and cutter. And when it's time for a change, removal is easy – simply wet the product with a sprayer and it comes off without a hitch. Cleaning is a snap too, just use a damp cloth and a little neutral soap. With a grammage of 180 grams per square metre and an M2 reaction to fire certification, this wallpaper is both high-quality and safe. Elevate your decor with the floral tiles design entryway wallpaper!
Why this product should be used for decoration
The floral tiles design entryway wallpaper brings a touch of nature indoors, with its intricate floral pattern that adds a sense of tranquility and beauty to any space. Its matt colours create a calming and soothing atmosphere, making it the perfect choice for creating a peaceful and elegant environment in your home. Whether you're looking to add a subtle touch of style to your entryway or create a statement wall in your living room, this wallpaper is the perfect choice to elevate your decor and bring a touch of nature indoors.
How to apply this product
Applying the floral tiles design entryway wallpaper is a simple process that requires only a few tools and a bit of patience. Start by applying glue to the wall or the product, then use a roller to smooth out any air bubbles. Next, use a brush to ensure that the wallpaper is properly adhered to the surface, and finally, use a cutter to trim any excess material. With these easy steps, you can transform your space and bring the beauty of nature indoors with the floral tiles design entryway wallpaper.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.