Floral Bouquet Pattern flower wallpaper
Reference: P6865A sophisticated floral bouquet pattern with a harmonious blend of botanical elements. The design features an array of delicate flowers and foliage, presenting a nature-inspired aesthetic suitable for a variety of spaces.
The Floral Bouquet Pattern flower wallpaper features a stunning design inspired by nature, with a beautiful pattern of botanical illustrations. The bouquet of flowers creates a decorative and visually appealing look, perfect for adding a touch of elegance to any space. The non-woven wallpaper is manufactured in matt colours, ensuring a high-quality finish that will last for 10-15 years. Applying the wallpaper is easy with the use of glue, a roller, brush, and cutter. Once applied, it can be easily cleaned with a damp cloth and neutral soap. The 180 grams per square metre grammage and M2 reaction to fire certification make it a durable and safe choice. When it's time for a change, the wallpaper can be effortlessly removed by wetting it with a sprayer. Each roll is 50 centimetres wide, making it convenient to handle and install.
Why this product should be used for decoration
The Floral Bouquet Pattern flower wallpaper is the perfect choice for adding a touch of nature-inspired beauty to any room. The stunning botanical pattern creates a decorative and visually appealing look that will instantly elevate the aesthetic of the space. Whether it's a bedroom, living room, or office, this wallpaper is sure to bring joy and charm to the environment, making it a must-have for anyone who appreciates the beauty of nature.
How to apply this product
Applying the Floral Bouquet Pattern flower wallpaper is a simple and straightforward process. Start by preparing the wall and ensuring it's clean and smooth. Then, apply the glue evenly on the wall and carefully place the wallpaper, using a roller to smooth out any air bubbles. Trim off any excess with a cutter, and voila! Your space is transformed with a stunning floral design that will bring joy and charm to the environment.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.