Black and white colours vertical line wallpaper
Reference: P6329The Black and white colours vertical line wallpaper features a stunning graphic design with vertical lines in black and white. The combination of these two classic colors creates a timeless and elegant look, perfect for any modern interior. The wallpaper is designed with a satin finish to prevent reflections and ensure excellent color intensity. It is washable, resistant, and suitable for any flat surface. The 80-micron thickness and built-in adhesive ensure durability and easy installation. Customizable sizes are available, making it a versatile choice for any space. The product is manufactured with top-quality materials, offering a lifespan of 8-10 years. Customers have the option to purchase a spatula for easy application. Please note that the sticker can only be used once.
Why this product should be used for decoration
The Black and white colours vertical line wallpaper is the perfect choice for adding a touch of sophistication to any room. The timeless black and white design creates a sleek and stylish atmosphere, making it an ideal option for modern interior decor. Its customizable sizes and easy installation make it a versatile and convenient choice for any space.
How to apply this product
To apply the Black and white colours vertical line wallpaper, simply peel off the backing and carefully place it on the desired surface. Use a spatula for smooth and easy application, ensuring a seamless finish.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.