Nature wall mural mushroom water splash
Reference: F11455A vibrant image capturing a mushroom amidst autumn leaves, glistening with water droplets as they splash around. The essence of nature is highlighted with the dynamic interplay of water and organic elements, showcasing the subtle beauty of the forest floor.
Introducing our stunning Nature wall mural mushroom water splash, a captivating design that brings the beauty of nature into your space! This mural features a breathtaking close-up of mushrooms flourishing amidst vibrant leaves, accentuated by the delicate raindrops and splashes of water that create a lively atmosphere. The photography is so vivid that you can almost feel the freshness of the forest in your home!
Why this product should be used for decoration
Transform your living space with our Nature wall mural mushroom water splash nature wall mural, designed to inspire and rejuvenate your environment. This mural not only elevates the aesthetic appeal of any room but also invites the tranquility of nature indoors. Imagine the warmth and serenity it brings as it creates a stunning focal point, perfect for any setting!
How to apply this product
Applying the Nature wall mural mushroom water splash nature wall mural is easy and enjoyable! Simply use glue on the wall or the product, along with a roller, brush, and cutter for a seamless finish. With a little patience, you can transform your space into a natural haven!
This mural is manufactured in matt colours using non-woven wallpaper, ensuring a sophisticated look. With a grammage of 180 grams per square metre, it boasts durability ranging from 10 to 15 years. Cleaning is a breeze; just use a damp cloth and a touch of neutral soap. When it's time for a change, this mural can be easily removed by wetting it with a sprayer. Plus, it’s produced and shipped in rolls 50 centimetres wide and has an M2 reaction to fire certification, ensuring safety and quality in every detail!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.