Horizontal slats wood effect wallpaper mural
Reference: F6902Why Use the Horizontal Slats Wood Wall Mural for Decoration?
Transform your space with the captivating design of our horizontal slats wood effect mural! This unique mural combines the natural beauty of wood with a modern twist. The horizontal slats create a visually appealing pattern that adds depth and texture to any room. Whether you want to create a cozy, rustic atmosphere or a sleek, contemporary look, this mural is the perfect choice. It brings warmth and character to your walls, making it a stunning focal point in any space.
How to Apply the Horizontal Slats Wood Wall Mural
Applying our horizontal slats wood effect wall mural is quick and easy! Simply follow these steps for a flawless installation. Start by preparing your wall and ensuring it is clean and smooth. Apply a layer of glue to the wall or directly to the back of the mural using a roller or brush. Carefully position the mural on the wall, making sure to align the edges. Smooth out any air bubbles using a brush or roller. Trim any excess material using a cutter. Voila! Your wall now boasts a stunning horizontal slats wood design wallpaper mural that will impress everyone who sees it.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.