Gradient bubbles 3D wall mural
Reference: F6855Why Choose Gradient Bubbles 3D Wall Mural for Your Decoration?
Immerse yourself in a visually stunning masterpiece with our Gradient Bubbles 3D Wall Mural! This extraordinary design combines vibrant colors, a mesmerizing gradient effect, and captivating 3D bubbles. It's like stepping into a dreamworld filled with life and joy! Transform any space into a work of art that will leave everyone in awe.
How to Apply Gradient Bubbles 3D Wall Mural?
Applying our Gradient Bubbles 3D Wall Mural is a breeze! Simply follow these easy steps: 1. Prepare your wall surface. 2. Apply glue evenly on the wall or mural. 3. Align the mural and smooth out any air bubbles using a roller. 4. Trim excess edges with a cutter. Voila! Your wall will instantly come to life with vibrant colors and a mesmerizing 3D effect.
Why Buy Gradient Bubbles 3D Wall Mural from Our Online Shop?
Here's why: Our Gradient Bubbles 3D Wall Mural is crafted with the highest quality non-woven wallpaper material, ensuring durability and longevity. With a weight of 180 grams per square metre, it offers a luxurious feel and a stunning matte finish. It's easy to clean with just a damp cloth and a little neutral soap, making maintenance a breeze. Our mural is produced and shipped in convenient 50-centimeter-wide rolls, making installation a seamless process. Plus, it comes with an M2 reaction to fire certification for added peace of mind.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.