Concrete panel wall mural
Reference: F6839Concrete Panels for Stunning Bathroom Murals
Our bathroom murals are designed with a unique texture that is inspired by concrete panels. The panels are flat, pre-fabricated pieces of concrete that are easy to install, durable, and cost-effective. Made from a mixture of cement, sand, and water, they come in a variety of sizes and shapes. Our bathroom design ideas are perfect for those who want to add a touch of sophistication to their bathroom decor. The matt colours and non-woven wallpaper material make it both elegant and long-lasting.
Easy to Apply Bathroom Mural Wallpaper
Applying the concrete tile bathroom mural wallpaper is simple and effortless. All you need is glue, a roller, a brush, and a cutter. The panels are flat, pre-fabricated pieces of concrete that can be applied to any wall or surface. Simply follow our easy-to-read instructions, and you'll have your stunning bathroom mural up in no time!
Choose Us for Waterproof Wall Murals for Bathrooms
Our online shop offers the best quality waterproof. Our panels have a grammage of 180 grams per square metre, making them thick and durable. They also have an M2 reaction to fire certification, ensuring that they are safe to use. With a durability of 10-15 years, our products are perfect for those who want a long-lasting solution to their bathroom decor needs.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.