Concrete and wood texture bathroom wall mural
Reference: F6843This concrete and wood texture bathroom mural is the perfect way to add style and sophistication to any interior. This wall mural has a modern and edgy design that combines concrete, wood, and texture in one eye-catching mural. This product should be used for decorating because it instantly adds character and interest to any room. It can easily be applied with glue and there are several tools you can use, such as a roller, a brush, and a cutter. The product is non-woven wallpaper with a grammage of 180 grams per square metre, making it durable and long-lasting. It can also be easily removed by wetting the product with a sprayer and it is certified with an M2 reaction to fire. Cleaning it is easy - just use a damp cloth and a little neutral soap. It is produced and shipped in rolls 50 centimetres wide.
Why This Product Should Be Used for Decoration
Concrete wood texture bathroom murals is a great choice for any decorating project. It is simplistically modern and has a unique design that can be a stunning addition to any interior. The design combines concrete, wood, and texture to create an eye-catching mural that will instantly add character and interest to any home or project. Plus, it comes in a range of matt colours which adds to its appeal.
How to Apply This Product
It is incredibly easy to apply. All you need is glue and some tools such as a roller, a brush, and a cutter. It can be applied directly to the wall, or to the product. The process is quick and mess-free, making it an ideal solution for any decorating project.
Why Buy This Product in Our Online Shop
All our products are tested for quality assurance, so you know you're getting the best when you shop with us. Plus, we offer great discounts and special offers, making it easy to find the perfect mural for your home or project. So why wait? Shop with us today and add some style and sophistication to your home.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.