Red brick texture mural
Reference: F6837The Brick texture Wall Mural is a stunning design that features bricks, tiles, and texture. This non-woven wallpaper is manufactured in matt colours and has a grammage of 180 grams per square metre. It has an M2 reaction to fire certification, which makes it safe for use in any room. The durability of this product is 10-15 years, so it is a long-lasting investment for your home. It can be easily removed by wetting the product with a sprayer, and it should be applied using glue on the wall or on the product. The tools to apply it are a roller, a brush, and a cutter. You can clean it with a damp cloth and a little neutral soap.
Why Use This Product For Decoration
It is perfect for adding a touch of texture and depth to any room. The design is visually stunning and will make a statement in any space. Whether you want to create an accent wall or cover an entire room, this mural is the perfect choice. It will add a touch of elegance and sophistication to your home, making it a place you'll love to spend time in.
How to Apply This Product
First, you need to prepare the wall or surface where you will be applying the mural. Make sure it is clean, dry, and smooth. Next, apply the glue to either the wall or the product, following the manufacturer's instructions. Then, use a roller or brush to smooth out any air bubbles or wrinkles. Finally, use a cutter to trim any excess wallpaper.
Why Buy This Product in Our Online Shop
Our online shop offers the best selection of high-quality wall murals, including this. We are committed to providing our customers with the best shopping experience, from the ease of ordering to the speed of delivery. Plus, our prices are unbeatable, so you can get the perfect wall mural for your home without breaking the bank.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.